GUANGZHOU HAOZHI INDUSTRIAL CO., LTD.

Consultation

Product Series: Dental Milling Spindle

Product Number:DGZ-60C

The tooth carving machine is mainly used for the forming and processing of denture products. The main processing materials are zirconia, resin, ceramics, etc

Main performance features

1.High precision: the runout of the taper hole of the spindle is ≤ 0.001mm, the dynamic precision stability of the spindle is high during processing, and the surface finish of the workpiece is effectively guaranteed.

2.High efficiency: the maximum rotation speed of the spindle reaches 60000rpm, and the material removal rate is significantly improved during processing. So as to ensure high efficiency processing.

3.High reliability: the main shaft is equipped with motor temperature control sensor to monitor the temperature of the main shaft during the processing in real time, and the famous brand high-precision ceramic ball bearing is used to ensure the long-life and reliable operation of the main shaft.

4.High energy saving cooling: the main shaft adopts air cooling mode, cooling air takes away the heat generated by bearing and processing, suppresses the temperature rise of main shaft, and reduces its impact on processing quality. At the same time, air curtain seal is provided for the main shaft to prevent dust and coolant from entering the bearing. Our company's dgz-03360 / 0.25-pg denture processing electric spindle cooling and air seal air flow rate are 50% lower than similar products in the market, greatly reducing the use cost of customers


 applicationdental prosthesis
cooling systemwater
bearing
ceramic ball bearing
chuck typeB005
chuck clamping range(mm)Φ3.175-Φ6
brake methoddriver+brake resistor
rated power(kW)0.9
S1 torque(N·m)0.15
voltage(V)200
Maximum Speed (rpm)60000
clamping diameter(mm)Φ62
tool change methodair cylinder
cooling or lubricant air flow(L/min)41-51(air)
motor systemasynchronous motor
bearing lubricant methodgrease lubrication
  motor heat protection                    PTC
   assembly direction            vertical/horizontal
           sensor type                         /
encoder type/
          fixed method                  clamping
     run-out(taper) (um)                       ≤1
     connector type                no connector
     EC / SE line length                     >0.8m
   rotation direction(from front side)     counterclockwise(forward)





Back

Contact Us

Contact Us

* These are required fields.

Submit

Online Request

Please fill in the details required, and we will reply to you as soon as possible.

* These are required fields.

Submit